Parts

The new Vittoria Mazza combines years of athlete input with cutting-edge tread technology, raising the bar on the mixed terrain Enduro tire category. Starting with a defined center tread, the Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs, making Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction, while also accelerating mud clearing. Cornering on the Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. Simply put, bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable, confident, and communicative feel at the limit of cornering. Mazza's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. The bar has been raised. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe width for tactile grip on rocks and roots - Stepped leading-edge center-tread maintains speed and delivers climbing traction

- 11 speed wide range cassette - Alloy spiders, spacers and lock ring - Fits Shimano/SRAM freehub

Even lighter, even more compact, and ideal as a spare, the S-Tubo-MTB tubes were developed to have a minimum possible packaging size. With a removable valve stem, the tubes have a size of only Ø3.5cm x 5cm height when packaged. The puncture resistance is the same as with standard butyl rubber tubes but with a weight of only 45g (for 29"). - 42mm valve length

Minimum weight and maximum protection: Tubo-MTB-Plus tubes are optimized for tire widths from 2.5" to 3.0", today’s standard for E-MTBs. Their low weight of 105g (for 27.5+) increases your battery life, and they're also a lightweight alternative to tubeless setups. - 42mm valve length

Super light at only 38g, the Tubo-ROAD-700c makes racing bikes even lighter. It's 70g lighter compared to a standard tube, a decisive success factor both over challenging long distances and when it comes to seconds. Suitable for disc and rim brake wheels.

The Descendant grip is for the performance-driven hard charger who needs maximum grip and confidence in their cockpit. Featuring a full-width contact area that extends from the inner clamp right to the end of the bar. The ridged pattern allows for a soft-to-touch feel and makes for superior grip and control. Available in solid colors, marble and gum options, these grips give you the option to match grip performance with your personal style. - Single-ring clamp for max width and comfort - Available in Black, Gray, Gum Rubber, Red, Gray/Black Marble and Red/Black Marble - Soft and durable ridged rubber grip pattern - Length: 133mm - Clamp: Single

Downhillers and freeriders need tough gear that can handle the abuse of big air and huge drops. TruVativ's Giga Pipe Team DH Bottom Bracket uses four sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

Genuine replacement parts Get back on the bike with fresh brake pads for optimal operation and safety. Replacement brake pads for Zoom brakes used on specific Trek and Fisher mountain bikes. - Replacement disc brake pads for Zoom HL-280 calipers - HL-280 Zoom calipers came stock on Trek 3500 Disc, X-Caliber, and other models

Speciale is the ultimate balance between aesthetics and performance. Developed by Time's engineers for the demands of the sport, this enduro pedal is made of a 6106-T6 aluminum body which is 20% more durable than other grades of aluminum. It features a wide platform, adjustable pins for optimal grip, and a micro-adjustable clamping system to meet the demands of the most advanced riders. The proven ATAC engagement system (TIME patent) allows easy clip in and positive, predictable release as well as a design that self-cleans even in the most difficult conditions. Like all Time pedals, the Speciale is 100% made in France at their factory in Nevers, exceeding high material and production standards.

Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut

- Labeled Size: 26 x 3.5 – 4 - ISO Width: 88mm – 100mm - ISO Diameter: 559 / 26" MTN - Valve: Presta Short 32-40mm - Valve Core: Removable - Wall Thickness: 1mm - Weight: 500g

- Labeled Size: 12-1/2 x 1.75 – 2.125 - ISO Width: 47mm – 62mm - ISO Diameter: 203 / 12.5" - Shaft Type: Smooth - Flat Protection: Thorn Resistant - Valve: Standard Schrader - Valve Core: Removable - Tube Compound: Butyl

- 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 468g (1.5-1.75), 536g (1.9-2.125)

- 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 559 / 26" mtn , 584 / 650b / 27.5" - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth - Weight: 452g (1.5-1.75), 642g (1.9-2.125)

- Size: 27.5 x 2.0 – 2.25 - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded

- Size: 29 x 2.1 – 2.3 - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 54mm, 55mm, 56mm, 57mm, 58mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 681g

- Size: 29 x 1.9 – 2.3 - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 673g

- Low Lead Valve - ISO Diameter: 203 / 12.5 - ISO Width (mm): 57mm - Labeled Size: 12 x 2-1/4 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth

- Size: 14 x 1.5 – 2.25 - ISO Width: 44 – 55mm - ISO Diameter: 254 / 14" - Wall Thickness: 0.9 - Shaft Type: Smooth - Valve: Standard Schrader - Valve Core: Removable - Tube Compound: Butyl

- Low Lead Valve - ISO Diameter: 340 , 349 / 16" recumbent - ISO Width (mm): 35mm - Labeled Size: 16 x 1-3/8 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight (g): 86g

- ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Shaft: Threaded - Valve Core: Removable

- ISO Diameter: 406 / 20" BMX - Wall Thickness: 0.9mm - Tube Compound: Butyl - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth - Weight: 110g (23-25mm), 128g (28-32mm), 144g (35-43mm), 160g (40-45mm)

Sintered Metallic replacement pads for the DH-R EVO, G-Spec DH-R, Quadiem, Quadiem, Slate T4, Slate G-Spec and "Select 4-Piston Tektro Brakes" - Sintered Full Metallic compound - Fits all TRP 4-Piston calipers and Tektro 4-Piston calipers - Color: Gold - Sold per wheel - Replacment pad for Tektro Q11TS

- Replacement hydraulic tubing with fittings

- Ergonomic lever blade - Advanced 9mm internal brake lever piston - 5mm hydraulic brake hose - High performance hydraulic brake fluid - Hybrid pistons - High performance resin pad compound - New high flow caliper - 2.3mm thick rotors - CNC machined and marked adapters - Compatible with 223/220/203/180/160/140mm rotors (sold separately) - Weight: 310g (Front without rotor and adapter)

TRP's new one-piece six-bolt disc rotor in 2.3mm thickness, coming in all sizes of 223 mm, 220 mm, 203 mm, and 180 mm. **For DH-R, DH-R EVO, Trail EVO and E-MTB Only** .

High performance brakes for your daily commuter or race machine. R879 brakes are the perfect blend of race day performance and everyday value. Forged then CNC’d 6061-T6 aluminum arms and a familiar cam style quick release make these brakes the perfect match for any modern road levers. SPECIFICATIONS - R879 - Forged / CNC machined 6061-T6 aluminum arms - In-place adjustable CNC road cartridge pad holders - TRP Carbon and Aluminum compound pads included - Stainless Steel hardware - Cam style quick release - Color: Anodized Black - Reach: 39-49mm - Weight: 160g Front 158g Rear including hardware - Maximum Rim Width: 27mm - Sold as Pair (front and rear) - Note: R879 calipers have a forging stamp that says “R870”. This marking is not indicative of model number.

The forged aluminum Spyke Levers have all the features you would expect from TRP: the ergonomic 2-finger design, Teflon bushings, forged clamp, and return spring. Mated to our Spyke calipers, these levers connect rider and machine for near-telepathic braking feel. - Lightweight design - Ergonomic lever design - Alloy lever and bracket - Teflon bushings - Stainless steel hardware - 2-finger lever blade - For use with RapidFire shifters - Weight: 156g/pair

TRP’s two piece rotors offer superior heat dissipation due to the aluminium center as well as excellent stiffness to provide you with confidence in your braking. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. SPECIFICATIONS - Sizes: 140mm, 160mm, 180mm, and 203mm - Colors: Black Center - Compatible with Centerlock hubs - Does not include lock-ring

TRP's two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Its two-piece design is now combined with TRP's new slotted rotor design with a 2.3mm thickness for DHR and E-MTB only. When debris gets trapped between the pad and rotor, braking power is dramatically reduced. This rotor's six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking for more consistent braking power and modulation in mixed conditions. - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness

Excellent modulation, cooler temperatures and great wet weather brake performance. The Black Prince brings the feel of braking on alloy wheels to carbon wheels. Fits: - SRAM Road - Shimano Road - Campagnolo Potenza 2016 - Campagnolo Athena 2016 - Campagnolo Veloce 2016 - Campagnolo Centaur 2017

- Includes: 2-Super Sticky Kush tape rolls, 2- Aluminum Laser Etched Powder Coated Star Plugz, 2- High End Rubberized Finish Tapes - Material: PU—Length: 2160mm Width: 30mm Thickness: 3mm - Highly resistant to UV rays, climate, and sweat - Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions - Star Plugz: 100% aluminum bar plugs

Bling collection delivers the flashiest bar tapes for the flashiest of riders. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. Silicone Gel dampens and eliminates all vibrations for the smoothest ride. Bling bling every time you ride around your city! - Eva Metallic (top layer): Fusion of metallic finish with the eva vibration dampening foam maximizes tackiness. Highly resistant to UV rays, climate, and sweat. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock-absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Silicone Gel: This backing provides additional comfort and vibration dampening. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maximizes grip. - Plush Hand Feel - Silicone Gel Injected 1 Set includes: - 2 Super Bling silicone gel tape rolls - 2 aluminum laser-etched Star Plugz (powder coated or anodized) - 2 High-end rubberized finish tapes

Superior hand feel that you need to feel to believe. Winner of world cups, Cape Epics, and stages of La Ruta de Conquistadores. - Material: Dual-density high-performance rubber - Supacaz pattern design for max control and ultimate tackiness - Diameter: 32mm - Star Ringz: 100% Aluminum - Anodized/powder coated - Laser-etched

Get ready to fly high with the Krypto DH pedals. Built tough with its CNC'd aluminum body and self-lubricating bushings, this pedal makes a big statement on the trail with full laser graphics and premium finish. Ten strategically placed pins keep you in maximum control. - Body: CNC-machined 6061 Aluminum - Axle: CNC-machined Cro-Mo - Bearings: Ultralight, self-lubricating sealed bushings - Replaceable pins - Size: 117mm x 110mm - Weight: 208g (each)

This ergonomically designed grip fuses comfort, performance, and style all into one. The ergonomically designed wing is plush for not only your hands but also your wrists and upper body. This is the ideal grip for Marathons or Stage Racing. - Material: Dual-density high-performance rubber - Star Ringz: 100% aluminum - Anodized/powder coated - Laser-etched

The Orbitron is the new gold standard for platform pedals. The high grip layout features 16 pins per side on an ultralight alloy body. Beautifully machined axles paired with premium bearings and bushings keep you running for miles to come. - Body: CNC-machined 6061 Aluminum - Axle: CNC-machined Cro-Mo - Bearings: Ultralight compact bushings + sealed bearings - Replaceable pins

Bar tape that’s straight from another dimension. The Prizmatik series utilizes exclusive materials to produce a super flashy, cleanable, and extremely durable bar tape like never seen before. Prizmatik tapes are a full 10 out of 10 when it comes to style. If you are looking to stand out, this is the bar tape for you. - Long Lasting PU Tape - Easy to Clean - Laser Etched Aluminum Bar Plugs - High-End Rubberized Finishing Tape

Our best-selling Super Sticky Kush tuned and tailored to the specific needs of gravel. Plush 3.2mm of thickness for extra shock absorption and control. Each roll is extra long to give you the freedom to wrap any way you want. - Tackiest/Best Hand Feel - Long Lasting PU Tape - Laser Etched Aluminum Bar Plugs - High-End Rubberized Finishing Tape - Material: PU Length: 2200mm Width: 30mm Thickness: 3.2mm

Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. Classic collection celebrates cycling with the most recognized colors. - Super Sticky PU (top layer): Superior hand feel with long lasting performance. Extremely tacky advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. Embossed with the sacred geometric Supacaz pattern that maximizes grip and tackiness. - Kush Foam (middle layer): Exclusive compound that maximizes the Kush feel from the thinnest amount of foam. Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Tackiest/best hand feel - Long-lasting PU tape - Laser-etched aluminum bar plugs - High-end rubberized finishing tape - Material: PU - Length: 2160mm - Width: 30mm - Thickness: 3mm

Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. Galaxy series adds just enough color to mix or match with any bike. - Super Sticky PU (top layer): Superior supple hand feel with long-lasting performance. Extremely advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maxamizes grip. - Tackiest/Best Hand Feel - Long-lasting PU tape - TruNeon: Super Bright, Exclusive Colors 1 Set includes: - Two Super Sticky Kush tape rolls - Two aluminum laser-etched Star Plugz (powder coated or anodized) - Two high-end rubberized finish tapes

Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. StarFade will transform any bike into a head-turner with a blast of color and flashy graphics. - Super Sticky PU (top layer): Superior supple hand feel with long lasting performance. Extremely advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maximizes grip. - Tackiest/best hand feel - Long-lasting PU tape 1 Set includes: - Two Super Sticky Kush tape rolls - Two aluminum laser-etched Star Plugz (powder coated or anodized) - Two high-end rubberized finish tapes

Converts 3-bolt LOOK style shoes to SPD MTB compatible cleats

- Replacement adjustable nut for three-speed internal hubs.

•Designed for caliper & cantilever brakes •Forged aluminum construction •25.4/26.0mm clamp •270g pair

- Fits 3-piece crank set - Includes right and left cup, lockring and bearings - English type - Shell: 68/73mm - Cup Material: Steel - Weight: 123 grams

- DT Swiss cartridge bearings - Sold in pairs

- Steel construction - Adapts BMX chainrings with 22mm hole to 19mm spindles - Bag of 10

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

• 5/6/7-speed rear derailleur • Highly affordable and reliable • SHIMANO Equivalent RD-TY21 / RD-A070 • 301 grams

Lightweight aluminum construction with a versatile riser bar design.

- One-piece bottom bracket cup set - Bearings included - Shell: 68mm - Spindle Type: OPC - Cup Material: Steel - Weight: 265 grams

- Universal design - Use: Fits single rail

- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm

• One-piece • 170mm • 24 TPI

• Compatible with many older caliper brakes • Flat top design metal pad holder • All weather pad compound

- Complete cable kits for internal three-speed hubs